Hand Held Products 2D IMAGER 4800P - Manual (Page 134)

10 - 2 4800p 2D Imager User’s Guide
Show Scan Driver Revision
Scan the bar code below to output the scan driver revision. The scan driver
controls image capture.
You may use the Show Scan Driver Revision option if you have firmware with a
base number of 31205480. Refer to the
Show Software Revision below for
information on determining the firmware revision in your unit.
Show Software Revision
Scan the bar code below to output the current software revision, unit serial
number, and other product information.
Show Data Format
Scan the bar code below to show current data format settings.
Resetting the Standard Product Defaults
If you aren’t sure what programming options are in your imager, or you’ve
changed some options and want the standard product default settings restored,
scan the
Standard Product Default Settings bar code below.
The Menu Commands starting on page 11-5 lists the standard product default
settings for each of the commands (indicated by an asterisk (*) on the
programming pages).
Show Scan Driver Revision
Show Software Revision
Data Format Settings
Standard Product Default Settings