Hand Held Products 2D IMAGER 4800P - Manual (Page 72)

6 - 18 4800p 2D Imager User’s Guide
Code 128 Message Length
Scan the bar codes below to change the message length. Refer to Message
Length Description (page 6-2) for additional information. Minimum and
Maximum lengths = 0-80. Minimum Default = 0, Maximum Default = 80.
Code 128 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
Code Page Mapping
of Printed Bar Codes on page A-6), and scan the value and the Save bar code
from the Programming Chart on the inside the back cover of this manual. The
data characters should then appear properly.
Minimum Message Length
Maximum Message Length
Code 128 Code Page