Hi-Touch Imaging Technologies BS-G400 - Manual (Page 17)

16
Special Function Introduction
3. Color Setting 4. Print Position
Choose SETUP,
and press
OK to
continue.
Choose SETUP,
and press
OK to
continue.
Select Printer
Setting and press
OK to continue.
Select Printer
Setting and press
OK to continue.
Choose Color
Setting and press
OK to continue.
Choose Print
Position and press
OK to continue.
Select a
reference image
saved in the
memory card for
color calibration,
then press
OK to
continue.
Place 4x4 or 4/2/4
sticker into the
paper cassette for
calibration
reference.
Note that in color
setting, only the
properties of
Contrast,
Brightness,
Sharpness, Color
R/G, Color B/Y,
and Position can
be adjusted. Based on the
printout of 4x4 or
4/2/4 sticker,
adjust the
parameters in the
A and B column if
needed, then
press
OK to save
values.
Note
「Print Position」must use HiTi BS serious 4 x 4 or 4/2/4 sticker.