Hi-Touch Imaging Technologies BS-G400 - Manual (Page 20)

19
7. Troubleshooting
Indicator Status
Status Problem Troubleshooting
Blinking x 1 Cover Open Open and close the ribbon door again.
Blinking x 2 Ribbon Missing Reinstall the ribbon cartridge
Blinking x 3 Ribbon Out Replace the ribbon cartridge
Blinking x 4 Paper Out
Reinstall photo papers and check
consumables status.
Blinking x 5 Paper Jam
Open the ribbon door and remove the
jammed paper.
Blinking x 6 Paper Mismatch
Please use BZ-compatible consumables
and check if consumables are correctly
placed in the paper cassette.
Note
If your problems are not listed above, please contact HiTi service center nearest to you.
Note that during printer operation, it is normal for the LCD controller to become warm to touch.