Honeywell HZC-855PX - Manual (Page 19)

- 19 -
5.12 SPECIAL FUNCTION
① Mirror Mode
: Mode ON is Mirror Mode, OFF is general screen state.
MIRROR OFF → H MIRROR →
V MIRROR → FLIP . . . .
② Sharpness
: Use to change the contour of Scene.
SHARPNESS 0 ~ 15
③ Negative Mode
: Use for Positive and Negative mode. ON is Negative mode, OFF is
Positive mode namely general screen state.
NEGATIVE OFF → ON → ….
④ Color Mode
: Use for changing color and monochrome ( black & white )mode .
ON is Color mode, OFF is black&white mode.
COLOR ON → OFF → ….
Let ’s enter the Title as “R1” , example
-. Select the position of title character by using Near or Far key.
The chosen position is blinking.
(Only chosen Cursor will be blink as “■”, rest of them
will be shown as a blank “ ”.)
TITLE: □
-. Select the character “R” among ⓐ ~ ⓓ by using UP,DOWN,
(+),(-) key. The chosen character “R” is blinking.
ABCDEFGHIJKLMNOPQ R ST
UVWXYZabcdefghijklmn
opqrstuvwxyz12345678
9!?#$%&<>*,.:;/+-=~■
-. Press MENU key, the character “R” is entered in the Title.
(Automatically the position will be forward to next position.)
TITLE: R □
-. If you want to edit specified character, you shall use
TELE/Wide to move on the position and NEAR/FAR to
select on the character. By using TELE/WIDE to position
the character to continue to edit.
-. Select character “1” using TELE, WIDE, NEAR, FAR
button and it will blink the cursor on the character “1”
ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmn
opqrstuvwxyz
1 2345678
9!?#$%&<>*,.:;/+-=~■
-. Push MENU to enter the character “1”.
TITLE: R 1 □
▣ How to Enter the Title ▣
④ Title
: It is the name of Camera. It enters 10 characters including blank. .
TITLE: ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
<< SETUP MENU >>
LENS MODE
AE MODE
WB MODE
NIGHTSHOT MODE
BLC/WDR MODE
PZM SETTING
CAMERA ID SETTING
SPECIAL FUNCTION
FACTORY DEFAULT
<< SPECIAL FUNCTION >>
MIRROR OFF
SHARPNESS 8
NEGATIVE OFF
COLOR ON
FREEZE OFF
BAUDRATE 9600bps
PROTOCOL DEFAULT
F. OSD DISP ALL
RETURN
<Fig 5-13. SPECIAL FUNCTION>