Nuisance prevention circuitry – Hornet Car Security G727T User Manual

Page 10

Advertising
background image

7

© 2005 directed electronics, inc.

transmitter does not have a panic button, this system can be pro-

grammed to enable a panic feature (refer to the Programming

Options).

If enabled, just press the lock button on your factory keyless transmit-

ter twice within three seconds to enter Panic Mode. The horn will

sound and the parking lights will flash for 30 seconds. To stop Panic

Mode at any time, press the unlock button on your factory transmitter.

nuisance prevention circuitry

®

Your system has Nuisance Prevention Circuitry

®

(NPC

®

). This circuitry

prevents annoying repetitive trigger sequences due to faulty door pin

switches or environmental conditions such as thunder, jackhammers,

airport noise, etc.

H

Heerree’’ss h

ho

ow

w iitt w

wo

orrkkss::

The alarm triggers three times. Each time, the same sensor or switch is

triggering the alarm. The three triggers are within 60 minutes of each

other. Your system will interpret this pattern of triggers as false alarms.

After the third trigger, your system ignores, or bypasses, that sensor or

switch (along with any other sensors or switches sharing the same

zone) for 60 minutes.

nnoottee:: The system can also be programmed so that pressing
the lock button twice within three seconds will activate an
optional accessory. If the unit is programmed to activate an
optional accessory, Panic Mode will not be operational.

Advertising