Hornet Car Security G727T - Manual (Page 9)

6 © 2005 directed electronics, inc.
TTo o een ntteerr o orr eexxiitt V Vaalleett ® ® M Mo od dee w wiitth h tth hee V Vaalleett ® ® ssw wiittcch h::
Turn ignition to “on” position,
then turn to “off” position. Press
and release the Valet ® switch with-
in 10 seconds. The status LED will
light steady if you have entered
Valet ® Mode. To exit Valet ® Mode, repeat the steps above. The LED will
turn off when exiting Valet ® Mode.
remote valet ®
Remote Valet ® is a convenient feature that makes bypassing the securi-
ty system easier. This feature makes it possible to exit or enter Valet ®
Mode using your factory keyless transmitter.
1. Open any door.
2. Press LOCK on the transmitter.
3. Press UNLOCK on the transmitter.
4. Press LOCK on the transmitter.
The status LED will stay on if you have entered Valet ® Mode, and it will
go out if you exited Valet ® Mode.
panic mode
If you are threatened in or near your vehicle, you can attract attention
by triggering the system with your transmitter! If your factory keyless
nnoottee:: The remote Valet ® feature will not work with all factory
keyless entry systems. Some keyless entry systems do not
work with a door open.