Hornet Car Security G727T User Manual
Page 11
8
© 2005 directed electronics, inc.
If the bypassed sensor tries to trigger the system while it is being
bypassed, the 60-minute bypass period will start over. This ensures that
a sensor that is continuously triggering will remain bypassed.
Doors are covered differently: If the alarm is triggered by an open door
for three full cycles (one-and-one-half minutes), the doors will be
bypassed until the trigger ceases.
nnoottee:: Arming and disarming the system does not reset this
function! The only ways to reset a bypassed zone are for it
to not trigger for 60 minutes or to turn on the ignition. If test-
ing your system, it is important to remember that this circuitry
can cause zones to be bypassed and appear to stop work-
ing. If five chirps are heard when disarming, false alarm pro-
tection has engaged. If you wish to clear the memory, turn
the ignition key on.