Hitachi StarBoard BT2G-061101 - Manual (Page 32)

4-2
StarBoard
BT-2G How to connect and disconnect BT-2G
English
4.2 USB Mode
If you would like to use BT-2G in the case which needs to connect as USB wired, please
connect BT-2G and PC as follows.
Connect
(1) Connect the USB cable to the tablet.
(2) Connect the USB cable to the PC and ready to use.
* USB mode is powered by USB bus power. No batteries are needed.
Disconnect
(1) Disconnect the USB cable from PC.
(2) Disconnect the USB cable from the tablet.
PC
BT-2G
(1)
(2)
* The receiving quality of the tablet may be influenced by environment. The best
environment for the tablet is where no other cordless products are functioning, such as
microwave ovens.
* Cement walls and wooden walls absorb radio wave and decrease receiving quality. Open
space without barriers is the best environment for the tablet.
Connecting environment