HONDA HS1132 - Manual (Page 25)

23
OPERATION
HS1132:
Electric-start Models (TAS, WAS type):
CHOKE KNOB
CLOSED
FAST
THROTTLE LEVER
POWER CORD
Pull the choke knob to the CLOSED position and move the throttle
lever to the FAST position.
Start the engine.
Connect your power cord to the switch box and the male end of
the power cord to a properly grounded 120 Volt ac outlet.
To minimize the possibility of potentially dangerous electrical shocks,
always use a 3-conductor power cord with a power rating of no less
than 15 amps. Also, be sure that the outlet you are using is properly
grounded.
Do not connect and disconnect the power cord with wet hands.
Be sure to hold the plug when disconnecting the power cord from the
electrical outlet or switch box. Do not disconnect by pulling on the
power cord.
5.
a.
06/11/16 10:15:51 31767721_024