Tire inspection, Auger and blower inspection, 48 servicing your snowblower – HONDA HS1132 User Manual
Page 50
48
SERVICING YOUR SNOWBLOWER
TIRE INSPECTION
AUGER AND BLOWER INSPECTION
Check the side wall and tread
surface of each tire for cracks,
damage, or excessive wear.
Check the tire pressure
8.5 psi (59 kPa , 0.6 kgf/cm )
Excessive inflation pressure can damage the tires. Do not inflate the
tires beyond the recommended pressure.
Check the auger, auger housing, blower and shear bolts for signs of
damage or other faults. If any of the shear bolts are broken, replace
them with the ones furnished with the snowblower. Additional shear
bolts and nuts are available from authorized Honda snowblower
dealers.
Shear bolts are designed to break under force that would otherwise
damage auger and blower parts. Do not replace shear bolts with
ordinary hardware bolts.
Tire pressure:
06/11/16 10:19:16 31767721_049