HONDA HS1132 - Manual (Page 51)

49
SERVICING YOUR SNOWBLOWER
SHEAR BOLT REPLACEMENT PROCEDURE
BLOWER SHEAR BOLT
AUGER SHEAR BOLT (2)
6 mm SELF-LOCKING NUT
6 mm HEX NUT (2)
Place the snowblower on a firm, level surface.
Turn the engine switch OFF, and remove the cap from the spark plug.
Clean the auger and blower of snow, ice or any other foreign
particles.
Check the entire snow clearing mechanism.
Replace any broken shear bolts. Tighten securely.
1.
2.
3.
4.
5.
06/11/16 10:19:24 31767721_050