Horizon Navigation NavMate Car GPS Receiver - Manual (Page 22)

8 Quick Start
NavMate Navigation System
2 Quick Start
Time to get you on the road with your NavMate Navigation System. Follow
these five easy steps and you are on your way.
WARNING! Before operating your NavMate, please carefully read
and follow the instructions provided in the “Safety Information and
Precautions” section of this manual.
Step 1 — Start up/Main Menu
NavMate Navigation System
With the ignition switch in the ‘run’ or ‘accessory’ position, power is
supplied to NavMate. The system automatically turns on when you turn on your
vehicle, and turns off when you turn off your vehicle. (Refer to “System
Controls” on page 12 for more details on the power switch.)
When your vehicle is started, your NavMate will automatically default to the
Please Drive Safely screen. Please read and follow the instructions on this
screen carefully.
When the system is turned on, the Please Drive Safely screen is displayed.
Press to accept, and the Main Menu screen is displayed.
Note: If a key is not pressed within 10 seconds, the system goes into “sleep”
mode and the screen turns gray. The gray screen will turn on only when you are
on the Please Drive Safely screen. Press any key to return to the Please Drive
Safely screen.
Portable NavMate Navigation System
When the cigarette lighter adapter is plugged into the vehicle, power is
supplied to your NavMate. For most vehicles, the system automatically turns on
when adapter is plugged in and turns off when adapter is unplugged. For other
vehicles, the system will turn on and off with vehicle ignition key.
When the system is turned on, the Please Drive Safely screen is displayed.
ENTER