Horizon Navigation NavMate Car GPS Receiver - Manual (Page 53)

Map Display Screen 39
User Manual
Screen 22. Map Display Screen
Depending on the landscape that you encounter along your route, the GPS
signal might change colors indicating the strength of the signal. The GPS signal
color codings are described as follows:
• green – GPS signal is free from obstruction and is being received regularly.
• yellow – GPS signal is partially blocked by obstructions, such as tall trees or
skyscraper buildings.
• red – GPS signal is unavailable. GPS signal is entirely blocked by
obstructions such as tall trees or buildings.
For NavMate Navigation System: Your navigation system does not
require a constant GPS signal due to its additional sensors. Refer to
“Vehicle Direction-Sensing Electronics” on page 1 for more details.
For Portable NavMate Navigation System: Your navigation system will
show the GPS Signal Lost screen with its step-by-step planned route
instructions, but it will not prompt you with upcoming turns until the GPS
signal is restored.
Note. There are two Map Display screen modes available on your navigation
system. (1) an active route Map Display shows your current route, and (2) a Map
Display when no route is active. When no route is active, the button shows
on the display.
The function buttons on this screen are described as follows:
Table 14. Map Display Screen Function Buttons
Function Button Press This Button to...
Display the Guide Display screen.
green triangle shows your vehicle’s heading and location.
yellow arrow shows the direction to be traveled.
pink line shows the planned route.
GPS signal
directional heading
zoom view level
distance to destination
MARK
GUIDE