HP 20/700 - Manual (Page 93)

92 Loading Tapes into the Library Chapter 3
Figure 26 Placing Tapes into Array Cells - 9840
Note Use only cartridges designed for your type of tape drives.
You must first unlock and open the main access door. This procedure is
explained in Opening the Library Front Doors on page 122.
You may also load cartridges into array cells by using the CAP(s). While this
method is more time-consuming to fully populate the library, the procedure is
explained in Importing Data Cartridges through the CAP on page 107.
After you have loaded all the cartridges, close and lock the main door. The
robot will automatically audit the cartridges and their locations within the
library.
1
2
1 9840 cartridge 2 9840 cartridge label