Harbor Freight Tools 91764 - Manual (Page 2)

Page 2 for technical questions, please call 1-800-444-3353. SKU 91764
SaVe thiS Manual
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the
receipt in a safe and dry place for future
reference.
Safety alert Symbol and Signal
Words
in this manual, on the labeling,
and all other information
provided with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. obey all
safety messages that
follow this symbol to avoid
possible injury or death.
danger indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
Warning
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
caution, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
notice is used to
address practices
not related to personal injury.
caution, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
iMportant Safety
inStructionS
failure to heed theSe
inStructionS May reSult
in perSonal injury and/
or property daMage:
Study, understand, and follow all 1.
instructions before operating this
device.
do not exceed rated capacity.
2.
be aware of dynamic loading!
Bouncing of dropping the load
suddenly may briefly create excess
load causing product failure.
use only on hard, level surfaces.
3.
center load on lift platform. 4.
immediately after lifting load, 5.
ensure that the locking bar is in
place. before moving, lower the
load to the lowest possible point.
Secure load with appropriate
6.
restraint device.
do not adjust safety valve.
7.
Wear anSi-approved safety 8.
goggles, heavy-duty work gloves
and safety shoes during use.