Harbor Freight Tools 91764 - Manual (Page 3)

Page 3 for technical questions, please call 1-800-444-3353. SKU 91764
Keep clear of load while lifting, 9.
moving and lowering.
lower load slowly.
10.
do not use for aircraft purposes. 11.
inspect before every use; do not 12.
use if parts are loose or damaged.
Keep work area clean and well
13.
lit. Cluttered or dark areas invite
accidents.
Keep children and bystanders away
14.
while operating. Distractions can
cause you to lose control.
Stay alert. Watch what you are
15.
doing, and use common sense
when operating. Do not use while
tired or under the influence of drugs,
alcohol, or medication. A moment of
inattention while operating may result
in serious personal injury.
Store idle lifts out of the reach of
16.
children and do not allow persons
unfamiliar with the lift or these
instructions to operate it. Lifts are
dangerous in the hands of untrained
users.
Have your lift serviced by a qualified
17.
repair person using only identical
replacement parts. This will ensure
that the safety of the lift is maintained.
Maintain labels and nameplates
18.
on the lift. These carry important
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Read lifting requirements in service
19.
manual of the motorcycle being lifted.
Industrial applications must follow
20.
OSHA requirements.
Do not allow anyone on the lift or the 21.
motorcycle or the ATV while on the
lift.
R
22. aise Casters off the ground to
prevent movement before loading,
unloading, raising, or lowering.
Before lowering, remove all tools and
23.
equipment from under lift.
WARNING: The brass components
24.
of this product contain lead, a
chemical known to the State of
California to cause birth defects (or
other reproductive harm).
(California Health & Safety code §
25249.5, et seq.)
Only use this lift to raise a motorcycle
25.
or an ATV to perform maintenance.
Do not attempt to transport or
relocate motorcycle/ATV while on the
Lift.
The warnings, cautions, and
26.
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must be
supplied by the operator.
SaVe theSe
inStructionS.