Harbor Freight Tools 91764 - Manual (Page 5)

Page 5 for technical questions, please call 1-800-444-3353. SKU 91764
Turn the Lifting Screws (18) 6.
counterclockwise to lower the lift onto
the Casters.
r-pins
(04)
Washers (23)
platform (35)
access
panel (36)
ramp
(37)
7. Place the Access Panel (36) into the
Platform (35).
Attach the Ramp (37) to the end of
8.
the Platform (35) using Washers (23)
and R-Pins (04).
9. Fit the Vise Assembly (34) to the
front of the Platform using Bolts (33),
Washers (23), Lock Washers (31),
and Nuts (30). Adjust to suit the
motorcycle. Note: Location of Front
Wheel Vise Assembly (34) in relation
to the Stop Plate (32) is adjustable
by means of removing Fastners 30,
31, 23 and 34. Bolts and Nuts to be
tightened only after determining the
proper tire mounting position.
Attach the Stop Plate (32) to the
10.
Platform using Bolts (33), Washers
(23), Lock Washers (31), and Nuts
(30). Do not tighten.
Fit the Lift Foot Pedal (11) over the
11.
Pump Piston Spindle (09).
Fit the Release Foot Pedal (10) over
12.
the Release Valve Spindle (05).
operation
read the entire iMportant
Safety inforMation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
before first use
Check and fill oil as needed. See 1.
checking and filling hydraulic
fluid instructions.
Bleed the Lift Jack according to the
2.
bleeding instructions.
Test the Lift several times for proper
3.
operation before attempting to lift a
load. if, after bleeding twice, the
lift still does not appear to be
working properly, do not use the
lift until it has been repaired by a
qualified service technician.