High End Systems Power Cue DMX - Manual (Page 38)

33
subsequent selection. An attempt to make a second link will produce the message in the
display ‘No linkable channels’. Links cannot apply to transparent channels.
If you adjust a linked channel in the client scene, the link for that channel is broken and the
link to the preset is broken completely if all linked channels are manually adjusted. Chan-
nels (in client scenes) which have been manually adjusted must be made transparent
before they can be linked again. Linked channels in client scenes must be unlinked before
a new link can be established.
Do not use the Overlay function in a scene which also calls up Presets. To do so will kill
any links to presets.
3. Scroll to the desired scene and
press STORE.
7. The display shows that the preset is in
place. You may now edit individual
channels/attributes (page 26, no. 6) but note
that you will break links with the preset for
each channel/attribute that you edit. 8. You can see from the scene channels list
that there is a Lnk/Nolnk and to which
scene. In the scene list an L alongside the
scene indicates that the scene in linked to
presets.
•Press Prog/Edit
•Press Scene
•Select a Memory
•Select Fixtures
•Press Preset
•Select Preset
Scene
•Edit Non-Preset
Channels
4. Press Fixture and then select fixtures
using the 16 push buttons.