High End Systems Power Cue DMX User Manual
Page 39
AUTO CHECK
When you set Auto Check to on, as described in the system options section later in this manual, the
Power Cue DMX automatically checks for programming errors and corrupt data held in memories.
34
3.
The occurrences of the error are listed,
Press ESCAPE to exit,
1.
When you are programming, if you see the
arrowed message, press STORE to track
down the error.
2.
Press each of the buttons in turn to
identify in which type of program the error
occurs. Press STORE to list the errors.
The display changes according to the button that
you press. In this example there is an error in
chase programming.
One scene, occurring in three different locations
is the problem. Further investigation might show
that this scene is a ZONE and cannot be
included in a chase.