High End Systems Power Cue DMX - Manual (Page 45)

Remember that an audio input connection is not absolutely necessary. The Power Cue
DMX is equipped with an internal microphone to run audio functions. It is disabled by
inserting a jack plug into the audio socket.
40
SELECTING SCENE ATTRIBUTES - GENERIC LIGHTING
1. Press Prog/Edit. 2. Press Scene.
5(a). Scroll through the options under the Type
button. If you select MOVING ZONE, this
screen appears and you can then adjust the
various attributes. When step is not
audio,
speed is enabled and may be adjusted using
the trackball.
Slope is either switch or
crossfade. Loop is either loop or one-shot.
When you push dim the level may be adjusted
using the trackball. Bump through the various
patterns to choose the zone effect you want.
Press STORE when finished. Note that the
speed refers to the time in minutes and sec-
onds taken for one cycle of the zone
pattern.
OR 5(b). Scroll through the options under
the Type button. If you select SOUND-TO-
LIGHT, this screen appears. If you now go
back into the channels menu, you will notice
that the channels no longer have levels but
are tagged
bass, tenor, alto and treble. You
can select each channel and change the
bass, tenor, alto and
treble settings using the
trackball.
TIP!