Print directly onto a cd/dvd – HP C5200 User Manual
Page 10
•
Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure
the paper-width guide does not bend the paper in the input tray.
•
Do not force paper too far forward in the input tray.
•
Use paper types that are recommended for the HP All-in-One.
Print directly onto a CD/DVD
1.
Use the software that came with the HP All-in-One to create and print a CD/DVD label.
2.
When prompted, carefully remove the CD/DVD holder that came with the HP All-in-
One.
The CD/DVD holder is stored below the main input tray.
3.
Securely snap the inkjet printable media onto the CD/DVD holder with the printable
side up. The CD/DVD should be placed on the ring at the end of the holder with the
arrows.
NOTE:
If you are using a smaller-sized media, flip the CD/DVD holder ring over
the CD/DVD.
Chapter 1
8
HP All-in-One overview
HP All-in-
O
ne
o
verview