Clean the hp all-in-one, Clean the glass, Clean the lid backing – HP C5200 User Manual

Page 17

Advertising
background image

10.

The HP All-in-One prints a test page, aligns the print head, and calibrates the printer.
Recycle or discard the page.
A success or failure message appears.

NOTE:

If you have colored paper loaded in the input tray when you align the print

cartridges, the alignment will fail. Load unused plain white paper into the input
tray, and then try the alignment again.
If the alignment fails again, you might have a defective sensor or print cartridge.
Contact HP Support. Go to

www.hp.com/support

. If prompted, choose your

country/region, and then click Contact HP for information on calling for technical
support.

11.

Press OK to continue.

Clean the HP All-in-One

To ensure that your copies and scans remain clear, you might need to clean the glass
and lid backing. You might also want to dust the exterior of the HP All-in-One.

TIP:

You can purchase an HP Cleaning Kit for Inkjet Printers and All-in-Ones

(Q6260A) that provides everything needed to safely clean your HP device. For more
information, go to:

www.shopping.hp.com/accessories-store/printer

.

Clean the glass

Fingerprints, smudges, hair, and dust on the main glass surface slow down performance
and affect the accuracy of the copy and scan features.

To clean the glass

1.

Turn off the HP All-in-One, unplug the power cord, and raise the lid.

2.

Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive
glass cleaner.

CAUTION:

Do not use abrasives, acetone, benzene, or carbon tetrachloride on

the glass, since they can damage it. Do not place or spray liquid directly on the
glass. The liquid might seep under the glass and damage the device.

3.

Dry the glass with a dry, soft, lint-free cloth to prevent spotting.

4.

Plug in the power cord, and then turn on the HP All-in-One.

Clean the lid backing

Minor debris can accumulate on the white document backing located underneath the lid
of the HP All-in-One.

To clean the lid backing

1.

Turn off the HP All-in-One, unplug the power cord, and raise the lid.

2.

Clean the white document backing with a soft cloth or sponge slightly moistened with
a mild soap and warm water.
Wash the backing gently to loosen debris. Do not scrub the backing.

Clean the HP All-in-One

15

HP A

ll-in-One ov

erview

Advertising