HP C5200 - Manual (Page 18)

3. Dry the backing with a dry, soft, lint-free cloth.
CAUTION: Do not use paper-based wipes, as these might scratch the backing.
4. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing)
alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual
alcohol.
CAUTION: Be careful not to spill alcohol on the glass or exterior of the HP All-
in-One, as this might damage the device.
5. Plug in the power cord, and then turn on the HP All-in-One.
Chapter 1
16 HP All-in-One overview
HP All-in-
O
ne
o
verview