HP 3500YL - Manual (Page 186)

IP Routing Features
Overview of IP Routing
ARP Age Timer
The ARP age is the amount of time the switch keeps a MAC address learned
through ARP in the ARP cache. The switch resets the timer to zero each time
the ARP entry is refreshed and removes the entry if the timer reaches the ARP
age.
You can increase the ARP age timeout maximum to 24 hours or more with this
command:
Syntax: [no] ip arp-age <[1...1440] | infinite>
Allows the ARP age to be set from 1 to 1440 minutes (24
hours). If the option “
infinite” is configured, the internal ARP
age timeout is set to 99,999,999 seconds (approximately 3.2
years). An
arp-age value of 0 (zero) is stored in the
configuration file to indicate that “ infinite” has been
configured. This value also displays with the show commands
and in the menu display (Menu > Switch Configuration >
IP Config).
Default: 20 minutes.
ProCurve(config)# ip arp-age 1000
Figure 5-1. Example of Setting the ARP Age Timeout to 1000 Minutes
To view the value of ARP Age timer, enter the show ip command as shown in
Figure 5-2.
5-12