Validation of server response packets -143, Validation of server response packets -144, Validation of server response packets – HP 3500YL User Manual

Page 317

Advertising
background image

IP Routing Features

Configuring DHCP Relay

VLAN

10

DHCP

Option

82

Server

Client

DROP

VLAN

20

VLAN

20

VLAN

30

VLAN

10

VLAN

20

APPEND

APPEND

Relay Agent “A”

Relay Agent “B”

Relay Agent “C”

Figure 5-67. Example Configured To Allow Multiple Relay Agents To Contribute an Option 82 Field

This is an enhancement of the previous example. In this case, each hop for an
accepted client request adds a new Option 82 field to the request. A DHCP
server capable of using multiple Option 82 fields can be configured to use this
approach to keep a more detailed control over leased IP addresses. In this
example, the primary DHCP policy boundary is at relay agent “A”, but more
global policy boundaries can exist at relay agents “B” and “C”.

Figure 5-68. Example Allowing Only an Upstream Relay Agent To Contribute an Option 82 Field

VLAN

10

DHCP

Option

82

Server

Client

DROP

VLAN

20

VLAN

20

VLAN

30

VLAN

10

VLAN

20

No Option 82

REPLACE

Relay Agent “A”

Relay Agent “B”

Relay Agent “C”

Like the first example, above, this configuration drops client requests with
spurious Option 82 fields from clients on the edge relay agent. However, in
this case, only the Option 82 field from the last relay agent is retained for use
by the DHCP server. In this case the DHCP policy boundary is at relay agent
“C”. In the previous two examples the boundary was with relay “A”.

Validation of Server Response Packets

A valid Option 82 server response to a client request packet includes a copy
of the Option 82 field(s) the server received with the request. With validation
disabled, most variations of Option 82 information are allowed, and the
corresponding server response packets are forwarded.

Server response validation is an option you can specify when configuring
Option 82 DHCP for

append, replace, or drop operation. (Refer to “Forwarding

Policies” on page 5-141.) Enabling validation on the routing switch can
enhance protection against DHCP server responses that are either from
untrusted sources or are carrying invalid Option 82 information.

5-143

Advertising