Hoshizaki DM-200B - Manual (Page 12)

12
B. Maintenance – Exterior Panels
To prevent corrosion, wipe the exterior occasionally with a clean and soft cloth. Use a
damp cloth containing a neutral cleaner to wipe off oil or dirt build up.
C. Preparing the Dispenser for Long Storage
CAUTION
When shutting off the dispenser for an extended time, drain out all water from
the water line and remove the ice from the dispensing bin. The bin should be
cleaned and dried. Drain the water supply line using air or carbon dioxide to
prevent damage to the line at sub-freezing temperatures.
When the dispenser is not used for two or three days, it is sufficient to only remove the ice
from the ice dispensing bin and unplug the unit, unless the dispenser will be at sub-freezing
temperatures.
1) Remove all ice from the ice dispensing bin.
2) Unplug the unit from the outlet.
3) Clean and dry the dispensing bin.
4) Close the water supply line shut-off valve and open the water supply line drain valve.
See Fig. 1.
5) Allow the line to drain by gravity.
6) Attach compressed air or carbon dioxide supply to the water supply line drain valve.
7) Blow the water supply line out using compressed air or carbon dioxide.
8) Close the water supply line drain valve.