Hi-Touch Imaging Technologies Mug Heat Press Kit - Manual (Page 16)

Useful Tips:
(1). Ensure no gap between photography and mug while using bubble eliminator to squeeze
out air pocket
(2). Tape the mug when bubble eliminator
(3). Use finger to press the wrinkle while wrinkle appears during air pocket removing.
8. Use mug locating tape to secure another side of the photo onto the mug’s
surface.
9. Hold on the mug holder and release the adjustor. Remove the mug from the
Bubble Eliminator.
10. Place the mug in Mug Heat Press wrapper. Hold on the mug holder and
tighten the space between mug and the wrapper.
<WARNING! Avoid the contact between plastic cover and mug handle)
ATTENTION ! Do not place the mug upside down