Fcc information – Hi-Touch Imaging Technologies Mug Heat Press Kit User Manual

Page 3

Advertising
background image

SAFETY INSTRUCTIONS

1. Read these instructions carefully. Save these instructions for future

reference. Follow all warnings and instructions marked on the product.

2. Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3. Do not use this product near water.

4. Do not place this product on an unstable cart, stand, or table. The product

may fall, causing serious damage to the product.

5. Openings in the cabinet and the bottom are provided for ventilation; to

ensure reliable operation of the product and to protect it form overheating,

these openings must not be blocked or covered. Placing the product on a

bed, sofa, rug, or other similar surface should never block the openings.

Theirs products should never be placed near or over a radiator or heat

register, or in a built-in installation unless proper ventilation is provided.

6. This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

7. If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not

exceed the extension cord ampere rating. Also, make sure that the total

rating of all products plugged into the wall outlet does not exceed the fuse

rating.

8. Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points or other risks. Refer all

servicing to qualified service personnel.

FCC INFORMATION

The Federal communication Commission Radio Frequency Interference

Statement includes the following paragraph:

This equipment has been tested and found to comply with the limits for a Class

B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, use and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction, may cause harmful interference to radio communication.

However, there is no guarantee that interference will not occur in a particular

Advertising