Option b: typical wireless setup (recommended) – HP C6100 User Manual

Page 12

Advertising
background image

12 • HP All-in-One

Basics Guide

HP Photosmart C6100 All-in-One series

Display keyboard tips:
To Select: use Arrow keys to highlight, and then press
OK .
For mistakes: Select Clear . Tip: If the Clear button does
not appear, select abc to display it.
For lowercase: Select abc
For numbers: Select 123
When you are fi nished: Highlight Done , and then
press OK .

If you have problems connecting to
the network, see the Basics Guide
for additional setup information.

b Press the Setup button on the HP All-in-One.
c Press until Network is highlighted, and then press OK . The Network Menu appears.
d Press to highlight Wireless Setup Wizard , and then press OK .
In a few moments, a list of detected networks appears on the display. The network with the strongest signal

appears fi rst.

e Do one of the following:
• Press to highlight the name of the network that you wrote down earlier, and then press OK .
• If the network name that you wrote down does not appear in the list, you can enter it manually. Press

to highlight Enter New Network Name (SSID) and then press OK . See Display keyboard tips to enter

text.

f If your network uses security, a prompt appears for the WEP key or WPA passphrase. Both are case

sensitive. Type the WEP key or WPA passphrase, as requested. See Display keyboard tips to enter text.

If the WEP key or WPA passphrase is not accepted, refer to Network Troubleshooting on page 15.
Note: If your router provides 4 WEP keys, make sure you use the fi rst one.
g Follow the prompts on the display to complete the network setup. If the connection is successful,
go to step C3
.

Option B: Typical Wireless Setup (Recommended)

a Locate and write down your wireless router settings.
Network Name (also called SSID):______________________________________________________
WEP key/WPA Passphrase (if needed):__________________________________________________

IMPORTANT: If you do not know this information, you cannot continue with your wireless setup. To obtain the
necessary information, you must consult the documentation for your wireless router, the router manufacturer, or
the person who originally set up your wireless network. As much as HP would like to help you, HP is unable to
answer questions about your wireless router or your network such as the Network Name, WEP key, or WPA
passphrase.

Advertising