HP C6100 - Manual (Page 9)

HP All-in-One • 9
B1
b
c
d
a Locate the Ethernet cable that you may have purchased
separately.
b Remove the yellow plug from the back of the device.
c Connect one end of the Ethernet cable to the Ethernet port on
the back of the device.
d Connect the other end of the Ethernet cable to the router.
Connect the Ethernet cable
Section B: Ethernet (wired) network
Important: Your computer and the HP All-in-One must be on
the same active, working network.
If you are using a DSL or cable modem, make sure you do not
connect the Ethernet cable from the HP All-in-One to the cable
modem. Connect it to the router only.