Holux GM-305 - Manual (Page 27)

27
(2) Move the marked field to the list of waypoints and press “ ”.
(3) Select a waypoint and press “ ”.
(4) Move marked field to “ˇ” and press “ ”. The waypoint is now selected into
the
route.
(5) To append second waypoint, just press “ ” and duplicate the above steps (1) – (4).
(6) Move marked field to “ˇ” and press “
” to complete creating a new route..
(7) Press ” ” to go back to former page.
Note! In Waypoint, the name and distance field defines the displaying column. Please
refer to P. 22 Waypoint A. Criteria step by step.
e.g. --------: means to display all waypoints;
w------: means display the entire ‘w’ initial waypoints.
---s---: shows the waypoints with s in the fourth column and
ignoring other columns.
(b) Insert Waypoints
Insert a waypoint before an existing waypoint.
(1) Move the marked field to the waypoint column in Fig. 5-2-3 and press “ ”.
(2) Select a waypoint, press “ ”.
(3) Press “ ”, select Insert WP and press “ ”.
(4) Move the marked field to the list of waypoints and press “ ”.
(5) Select a waypoint and press “ ”.
(6) Move marked field to “ˇ” and press “ ”. The waypoint is now selected into
the
route.
(7) To insert 2
nd waypoint before the one you just inserted, follow steps (3) – (6)
again.
(8) To insert a new waypoint before another waypoint, follow steps (1) - (6) again.
(9) Press
” ” when complete.
(c) Delete Waypoints
Delete a waypoint from a route
(1) Move the marked field to the waypoint column in Fig. 5-2-3 and press “ ”.
(2) Select the waypoint to be deleted, press “ ”.
(3) Press “ ”, select Delete WP and press “ ”.
(4) Move marked field to “ˇ” and press “ ” to complete the deletion.
(5) Press ” ” when complete.
C. Edit Routes
(i) Go back to the page as Fig. 5-2-1 or select from Main Menu.
(ii) Select the route to be edited and press “ ” as Fig. 5-2-3.