Holux GM-305 - Manual (Page 39)

39
I. BASIC SETTING
A. Power saving: ON
B. Display (GM-305-DT, GM-305-HT only):
(i) Interesting point: Waypoint only
(ii) Road: All Roads
C. Cursor speed: Low Speed
D. Distance measuring: OFF
E. Map orientation: North Up
F. Time: Greenwich Time
G. Navigation: ON
H. Datum: WGS 1984
I. NMEA output: OFF
J. Waypoints: Starts from W001
K. Routes: Starts from R001
L. Waypoints & Routes
Saved in built-in memory. Will remain in memory when downloading new map.
M. Track log: OFF
Saved in built-in memory. Will remain in memory when downloading new map.
(i) Recording mode
(a) Distance: 50m
(b) Time: 10sec
(ii) Show: OFF (for saved track logs)
N. Down load / Up load program port: COM1 (305v100.exe)
II. SPECIAL ENGINEERING SETTING
Both pages as Fig. 7-0-1 and Fig. 7-0-2 are engineering setting. If you are not a specialty,
please
do not Configure it. The setting is displayed only vertically, not horizontally. Once a
mistake has
been made, please do as follows:
A. Press and hold ” ” for 2 seconds
satellite page as Fig. 7-0-1.
B. Press “ ” as Fig. 7-0-2.
C. Press ”
”.
D. Move the marked field to “ˇ” and
press ” ”.
Fig. 7-0-1 Fig. 7-0-2