Hitachi HTD-K160 - Manual (Page 16)

16
Antenna Hookups Antenna Hookups Antenna Hookups Antenna Hookups Antenna Hookups
Connect the supplied AM / FM antennas for listening to the radio.
• Connect the AM loop antenna to the AM terminals.
• Connect the FM pigtail antenna to the FM 75-ohm coaxial terminal.
Note
• To prevent noise pickup, keep the AM loop antenna away from
the system and other components.
• Be sure to fully extend the FM pigtail antenna.
• After connecting the FM pigtail antenna, keep it as horizontal as
possible.
Skill of connecting speaker wires
Push and hold Speaker terminal tab down to insert wire. Re-
lease tab to lock wire in terminal. Make sure the insulation is
completely removed from the ends of speaker wires at all
connection points.
If you have poor FM reception
Use a 75-ohm coaxial cable (not supplied) to connect the sys-
tem to an outdoor FM antenna as shown below.
Note
• If you connect the system to an outdoor antenna, ground it
against lightning.
• To prevent a gas explosion, do not connect the ground wire to a
gas pipe.
FL C FR SL SR
(8 )
L
R
AUDIO
IN
AUDIO
OUT
AUX IN