Hitachi HTD-K160 - Manual (Page 29)

29
English
GENERAL SETUP GENERAL SETUP GENERAL SETUP GENERAL SETUP GENERAL SETUP
TV DISPLA TV DISPLA TV DISPLA TV DISPLA TV DISPLAY Setting Y Setting Y Setting Y Setting Y Setting
Path: Main Page General Page TV DISPLAY
Select the aspect ratio of the TV set connected.
The default setting is underlined.
• PAN SCAN: When a normal TV is connected. Display a wide
picture on the whole screen with a portion (right and left sides)
automatically cut off.
• LETTER BOX: When a normal TV is connected. Display a
wide picture with black bands appearing at the top and bottom
of the screen.
• WIDE 16:9:Select to play wide-screen video on a wide-screen
TV.
PAN SCAN
LETTER BOX
WIDE 16:9
Note
• Some wide-screen discs that do not permit Pan & Scan
mode playback are automatically played in Letterbox mode.
• You must set the screen mode on your wide-screen TV to
“FULL”.
• If WIDE is selected and a normal TV is connected, 16:9
content will appear distorted during playback (objects look
thin).
TV TYPE Setting TV TYPE Setting TV TYPE Setting TV TYPE Setting TV TYPE Setting
Path: Main Page General Page TV TYPE
Select the correct color TV system.
The default setting is underlined.
• AUTO: Select the output of the video signal either PAL or NTSC
in multi system.
• NTSC: Change the video signal of a PAL in NTSC system.
• PAL: Change the video signal of a NTSC in PAL system.
VIDEO OUT Setting VIDEO OUT Setting VIDEO OUT Setting VIDEO OUT Setting VIDEO OUT Setting
Path: Main Page General Page VIDEO OUTPUT
Select the video output terminals.
The default setting is underlined.
• S-VIDEO: Composite video output and S-video output are
available.
• RGB: Color separate signal output are available.