Honeywell HREP4 - Manual (Page 44)

44
Installation
Figure 2-29 Sequence Window
5. Click ADD. The SEQUENCE SETUP window appears.
Figure 2-30 SEQUENCE SETUP Window
6. Select a screen display layout from the VIEW TYPE, select the channels for the layout
from the CONFIGURE panel, then click CONFIRM.
Click ADD to add another mode.
Double-click the current sequence to modify it. The SEQUENCE SETUP window reappears.
Click CLOSE when you are finished.
Activating a Sequence
Press SEQ on the front panel or select Sequence from the control bar when in live
view. See Figure 2-8 on page 30 .
Modifying a Sequence
1. Double-click in the List column the sequence you want to modify.
The EDIT window appears.