Honeywell HREP4 - Manual (Page 25)

HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B 25
08/10
Rear Panel Description
Figure 2-2 Rear Panel
Table 2-2 Rear Panel Description
Group Name Description
A CAMERA
INPUTS Connect up to 4/8/16 camera inputs (depending on
your model).
B MONITOR Main BNC monitor.
SPOT OUT BNC spot monitor.
C AUDIO
INPUTS/
OUTPUTS Up to 4 audio inputs and one audio output can be
connected.
D PAL/NTSC
Switch Change the camera input type.
E ALARM
INPUTS Up to four alarm inputs can be connected and
configured as high or low inputs with common ground.
RELAY
OUTPUT One alarm output can be connected and configured as
high or low output with a common ground.
F RS485 Connect a PTZ camera.
G LAN LAN connection to a router or internal network.
H DVI DVI main monitor connection to a PC monitor or a
plasma screen.
Note If you want to connect to a VGA monitor, please
use a DVI-to-VGA converter (supplied).
I POWER Connect to a 12V/5A adapter (supplied).
D
C
Example shown is the 16 channel model. The back panel layout might vary based on
the model of the DVR.
A B E D G H I
C
F