Using digital zoom, Figure 2-9, Ptz window – Honeywell HREP4 User Manual
Page 31: Figure 2-10, Example of the digital zoom
HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B
31
08/10
Figure 2-9
PTZ Window
2. Select the camera by channel.
3. Use the arrow buttons to reposition the PTZ camera field of view.
4. Use ZOOM, FOCUS, and IRIS to change the current camera view.
5. Click PARAMETER to configure PTZ camera parameters.
See
on
for descriptions of front panel and remote controller controls for
PTZ cameras.
Using Digital Zoom
When viewing a channel in full screen, you can use your HREP8 or HREP16 to zoom in to
a particular area by up to 8 times. The HREP4 supports 2 times digital zoom without a small
picture-in-picture window.
Select the desired channel, then navigate to ZOOM
on the control bar, and then
click .
Figure 2-10
Example of the Digital Zoom
Select the camera channel
This small window shows the
full image. For HREP8 and
HREP16, the main display area
shows the zoomed portion.
Click here to escape
Zoom mode.
Use these arrows to move
the zoomed area.