Figure 2-39, System management window, Figure 2-40 – Honeywell HREP4 User Manual
Page 49: System information window, Configuring the system date/time, Configuring system management settings
HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B
49
08/10
Configuring the System Date/Time
1. Click DATE/TIME on the left side of the SYSTEM window.
2. Use the
to configure the following settings:
Configuring System Management Settings
1. Click SYSTEM MANAGEMENT on the left side of the SYSTEM window.
The SYSTEM MANAGEMENT window appears.
Figure 2-39
System Management Window
2. Click INFO. The SYSTEM INFORMATION window appears.
Figure 2-40
SYSTEM INFORMATION Window
DATE & TIME
Set the current date and time
DATE FORMAT
Determine how the date is displayed.
TIME FORMAT
Determine how the time is displayed.
NETWORK TIME
SERVER
If the DVR is connected to the internet, the time and date
can be accurately set by selecting SYNC and pressing
.
TIME ZONE
Set according to the region in which the DVR is used.
D.S.T.
When on, the DVR will automatically adjust the time by one
hour on the relevant date in Spring and Autumn.