Configuring for e-mail notifications, Figure 2-50, E-mail setup menu – Honeywell HREP4 User Manual

Page 57

Advertising
background image

HREP Color Digital Video Recorder User Guide

Document 800-06847 Rev B

57

08/10

Caution

To use the DDNS function, you need to set up port forwarding:
a. Default WEB SERVICE PORT: 8080
b. Default RTSP SERVICE PORT: 554

The default DDNS HOST NAME is your Mac address. You can
connect in one of two ways:
(Mac address/Host name)
00115ff00213.dvrlink.net
1234.dvrlink.net (You can enter any DDNS Host name.)

Configuring for E-mail Notifications

1. Click E-MAIL on the left side of the NETWORK window.

The E-MAIL setup menu appears.

Figure 2-50

E-MAIL Setup Menu

2. Configure the following settings:

SERVER

The SMTP outbound e-mail server that should be used to send
e-mail notifications.

PORT

The outbound e-mail port number.

SECURITY

Set to OFF if the SERVER does not require a user name and
password to connect.

USER

Enter a user name to identify the DVR in e-mail messages.

PASSWORD

If SECURITY is set to ON, then enter the password.

FROM

Enter an e-mail address or any text. This is used only for a test
e-mail from the e-mail sender.

TEST E-MAIL

You can send a test e-mail to check the settings.

Advertising
This manual is related to the following products: