Configuring disk management settings, Figure 2-56, Disk management setup window – Honeywell HREP4 User Manual

Page 63

Advertising
background image

HREP Color Digital Video Recorder User Guide

Document 800-06847 Rev B

63

08/10

Configuring Disk Management Settings

Select DISK MANAGEMENT in the Main system setup window, then click

. The DISK

MANAGEMENT setup window opens.

Figure 2-56

DISK MANAGEMENT Setup Window

Highlight DISK MANAGEMENT, then press

to manage the internal hard drives.

Note

When a RECORD TIME LIMIT is set, the OVERWRITE option cannot be
changed.

RECORD TIME LIMIT

In certain circumstances, it might be necessary to limit the
amount of footage stored on the DVR (to comply with data
protection laws for example).
Recording can be limited to 12 hours, 1 day, 2 days, 3
days, 1 week, or one month.
When the DVR has this amount of footage stored, it will
start to overwrite the earliest recorded footage.

OVERWRITE

When ON, the DVR starts overwriting the earliest recorded
footage once the hard drive becomes full. In this case, the
percentage of hard drive used shown in live display will
always be 99%.
When set to OFF, the DVR continues recording from that
time until the hard disk capacity is full. The DVR will
Overwrite all video that was recorded before the time that
Overwrite was set to OFF, and then the DVR will stop
recording.

FORMAT

If necessary, use this option to erase all footage from the
DVR.

Advertising
This manual is related to the following products: