Configuring alarm setup, Figure 2-64, Event window – Honeywell HREP4 User Manual
Page 69: Table 2-5, Color codes for the recording modes
HREP Color Digital Video Recorder User Guide
Document 800-06847 Rev B
69
08/10
Figure 2-64
EVENT Window
5. Select the type of event recording (NONE, CONTINUOUS, MOTION,
CONTINUOUS/MOTION), then click OK. The EVENT window closes.
Color Codes for the Schedule Screen
The schedule screen uses four differently colored blocks to indicate the different recording
modes.
Configuring Alarm Setup
Click ALARM RECORDING on the left side of the RECORDING setup window.
The ALARM RECORDING Setup window opens.
Configure ALARM RECORDING in the same way you configure CONTINUOUS/MOTION
RECORDING. See
Configuring Continuous/Motion Recording
for more
information.
SIZE/FPS/QUALITY and SCHEDULE Configuration Fields
Table 2-5
Color Codes for the Recording Modes
Block Color
Recording Mode
PINK
No scheduled or motion recording.
SKY BLUE
Continuous recording.
BLUE
Recording triggered by motion detection.
YELLOW
Continuous recording and recording triggered by motion
detection.
SIZE/FPS/QUALITY
Recording settings for each channel can be defined across
a 24-hour period, in blocks (for example between 09:00
and 18:00), or for each individual hour.
Note
When SCHEDULE MODE is set to WEEKLY, each
day of the week can also be selected.
SCHEDULE
Use this tab to configure at what times the DVR records
and whether it records continuously or as a result of
motion detection.