Humminbird 700 SERIES 786CI - Manual (Page 25)

16
NOTE: Navigation is not affected by the Screen Snapshot feature. Also, if Screen
Snapshot is enabled, but there is not a GPS receiver connected, pressing the MARK key
will capture the screen image but an error will display that says a GPS position fix is
required to create a waypoint.
To view saved screen snapshots from the Screen Snapshot View:
1. Make sure that the optional-purchase MMC/SD card used to capture
the screen is installed in the card slot.
2. Press the VIEW key until you see the Screen Snapshot View.
3. Press the UP or DOWN Cursor keys to scroll through the available
screen snapshots thumbnails. The selected thumbnail will be
highlighted with arrows. Press the RIGHT Cursor key to view the full
image.
• When you highlight a screen snapshot thumbnail, the amount of
space remaining on the MMC/SD card will be displayed in the
information box.
• A red border around the full screen indicates that the view is a
saved screen capture, not a “live” view.
• Press the DOWN Cursor key to view the next screen snapshot.
• Press the LEFT Cursor key to return to the Screen Snapshot View
file list.
To view saved screen snapshots from a Chart View:
Waypoints created with a screen snapshot are displayed in Chart View as a
screen snapshot icon.
1. Make sure that the optional-purchase MMC/SD card used to capture
the screen is installed in the card slot.
2. Press the VIEW key until you see a Chart View.
3. Use the 4-WAY Cursor Control key to move the active cursor onto a
screen snapshot icon. When the cursor snaps onto the screen snapshot
icon, a thumbnail preview of the snapshot will be displayed on the
screen.
4. Press the INFO key to access the Waypoints Info submenu.
Views