Humminbird 700 SERIES 786CI - Manual (Page 57)

48
N No orrm ma all
Use Normal for on-the-water operation. Press the POWER/LIGHT key to power
on your Chartplotter. After the Title screen is displayed, a 30 second Navigation
Warning screen is shown. While the Navigation Warning screen is displayed,
press the EXIT key. The Chartplotter will enter Normal mode for on-the-water
operation.
Exit Normal operation by powering your Chartplotter off.
S Siim mu ulla atto orr
Use Simulator to learn how to use your Chartplotter before taking your boat on the
water. The Simulator is a very powerful tool that provides a randomly-updated
display which simulates on the water operation.
Selecting Simulator from the Start-Up Options Menu allows you to pre-configure
your Chartplotter for on-the-water operation. Any menu changes you make will
be saved for later use. We recommend going through this manual while using the
Simulator, since all of the menus function and affect the display in the same way
as they would in Normal operation.
A message will appear on the display periodically to remind you that you are
using the Simulator.
Exit the Simulator by powering your Chartplotter off.
Simulator (shown with optional-purchase
Weathersense® attached)
Start-Up Options Menu