Humminbird 700 SERIES 786CI - Manual (Page 72)

63
Remove Grid
(only if a Grid is Active)
Remove Grid removes the waypoint grid from the display. This menu option will
only appear when a grid has already been applied to a waypoint.
NOTE: See Introduction to Navigation: Add a Waypoint Target or Trolling Grid for
more information.
To Remove a Grid:
1. Highlight Remove Grid on the Navigation X-Press™ Menu.
2. Press the RIGHT Cursor key to remove the grid.
Waypoint [Name]
(Most recently-created waypoint)
Waypoint [Name] allows you to view the waypoints submenu for the most
recently created waypoint.
NOTE: You must have pressed the MARK key at least once since you last powered up
the Chartplotter for this menu option to appear.
To view the Waypoint [Name] Submenu:
1. Use the 4-WAY Cursor Control key to move the cursor to a position on
the screen, and press the MARK key once to save a waypoint.
2. Highlight Waypoint[Name] on the Navigation X-Press™ Menu.
3. Press the RIGHT Cursor key to view the Waypoints submenu.
NOTE: See Navigation Menu Tab for more Waypoints information.
Waypoint [Name] Submenu
Navigation X-Press™ Menu