Heath Zenith Wireless Push Button Accessory 598-1105-06 - Manual (Page 8)

-8- 598-1105-06
Troubleshooting
Chime does not sound:
• Make sure push button and chime codes are the same (See pages 
through 6).
• Check orientation of push button battery (See pages 5 and 6).
• Check charge of push button and chime batteries (if applicable), replace
if necessary.
Batteries seem OK, but the chime does not work when installed:
• Do not mount chime or push button on metal or near metal studs. This
reduces the transmitter range. Use 1/4" to 1/2" (6 to 1 mm) wood
shims to move chime or push button off metal surface.
• Concrete floors may reduce range. Move chime away from floor.
• Try locating chime closer to push button.
The range of the wireless chime can vary with location, temperature and
battery condition.