Tools included parts included, Assembly step 1 – Horizon Fitness B701 User Manual
Page 4
BEFORE
YOU
BEGIN
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
BIKE
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
7
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
BIKE
OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
TOOLS INCLUDED
PARTS INCLUDED
c
Phillips Screwdriver
c
5mm T Wrench
c
6mm T Wrench
c
13/15mm Flat Wrench
c
1 Console
c
1 Console Mast
c
1 Main Frame
c
1 Front Stabilizer Tube
c
1 Rear Stabilizer Tube
c
1 Seat Base
c
1 Seat Back
c
2 Pedals
c
2 Foot Straps
c
1 Handlebar Set
c
5 Hardware Bags
c
1 Water Bottle Holder
c
1 AC Adaptor
c
1 Audio Adaptor Cable
c
3 iPod Dock Inserts
c
1 Universal MP3 Player Dock Insert
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
CONSOLE
WATER BOTTLE HOLDER
MAIN FRAME
FRONT STABILIZER TUBE
UPPER HANDLEBAR
MAIN FRAME
SEAT MECHANISM
SEAT BACK
HANDLEBAR SET
SEAT BASE
SEAT ADJUSTMENT LEVER
REAR STABILIZER TUBE
PEDALS
CONSOLE MAST
iPOD
®
DOCKING STATION
CRANK ARMS
For a complete exploded diagram, visit us at www.horizonfitness.com
ASSEMBLY STEP 1
A
004721-00
Z01
;M8x1.25Px25L;
005145-A
Z02
B
;f8.2xf19.0x2.0t;
C
6
004755-00
Z06
;M8x1.25Px16L; ;
6
8
E
004382-00
Z07
;M5x0.8Px15L; ; ;
4
F
005165-00
Z04
;f8.2xf18.0x1.5t;
G
004733-00
Z05
;M8x1.25Px40L( 15L)
8
10
MAIN FRAME
FRONT STABILIZER TUBE
REAR STABILIZER TUBE
BOLTS (A)
SPRING
WASHERS (B)
WASHERS (C)
BOLTS (A)
WASHERS (C)
SPRING
WASHERS (B)
WASHER (C)
19 mm
Qty: 4
BOLT (A)
25 mm
Qty: 4
WASHER (C)
19 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
BOLT (A)
25 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
HARDWARE BAG 1 CONTENTS:
ASSEMBLY STEP 1:
Open
HArDWAre BAG 1.
Attach the
reAr STABiLiZer TUBe to the mAiN FrAme using 2 BOLTS (A), 2 SPriNG WASHerS (B) and 2
WASHerS (C).
Attach the
FrONT STABiLiZer TUBe to the mAiN FrAme using 2 BOLTS (A), 2 SPriNG WASHerS (B) and 2
WASHerS (C).
NOTe: Make sure to position FrONT STABiLiZer TUBe so that wheels are on the front side of the bike, as
shown in illustration.
A
B
C
B701_Rev.1.4.indd 6-7
7/29/08 9:21:23 AM