Horizon Fitness B701 - Manual (Page 6)

BEFORE
YOU
BEGIN
10
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
BIKE
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
11
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
BIKE
OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY STEP 
WASHER (C)
19 mm
Qty: 2
BOLT (H)
20 mm
Qty: 4
WASHER (C)
19 mm
Qty: 2
BOLT (H)
20 mm
Qty: 4
ARC WASHER (G)
18 mm
Qty: 2
SPRING WASHER (I)
18 mm
Qty: 2
WASHER (G)
18 mm
Qty: 2
Side View
SPRING WASHER (I)
18 mm
Qty: 4
HARDWARE BAG  CONTENTS:
Open HArDWAre BAG 4.
Tie the CONSOLe WireS to the Pre-ATTACHeD rOUTiNG Wire. Carefully pull CONSOLe WireS through
CONSOLe mAST.
NOTe: Do not pinch wires.
Attach the CONSOLe mAST to the mAiN FrAme using 2 BOLTS (H), 2 SPriNG WASHerS (i) and 2 WASHerS
(C) on the front surface. Use 2 BOLTS (H) and 2 ArC WASHerS (G) on the CONSOLe mAST sides, as shown in
illustration.
A
B
C
ASSEMBLY STEP 
A 004721-00 Z01 ;M8x1.25Px25L;
005145-A Z02 B ;f8.2xf19.0x2.0t;
C 6 004755-00 Z06 ;M8x1.25Px16L; ;
6
8
E 004382-00 Z07 ;M5x0.8Px15L; ; ; 4
F
005165-00 Z04 ;f8.2xf18.0x1.5t;
G 004733-00 Z05 ;M8x1.25Px40L( 15L) 8
10
ARC WASHERS (F)
SEAT BACK
SEAT BASE
SEAT MECHANISM
BOLTS (E)
ARC WASHERS (F)
BOLTS (E)
Open HArDWAre BAG 3.
Attach the SeAT BASe to the SeAT meCHANiSm using 4 BOLTS (e) and 4 ArC WASHerS (F), as shown in
illustration.
Attach the SeAT BACk to the SeAT meCHANiSm using 4 BOLTS (e) and 4 ArC WASHerS (F), as shown in
illustration.
A
B
C
ARC WASHER (F)
15 mm
Qty: 8
BOLT (E)
45 mm
Qty: 8
ARC WASHER (F)
15 mm
Qty: 8
BOLT (E)
45 mm
Qty: 8
Side View
HARDWARE BAG  CONTENTS:
A 004721-00 Z01
005145-A Z02 B
C 004755-00 Z06
E 004382-00 Z07
F 005165-00 Z04
G 004733-00 Z05
BOLTS (H)
BOLTS (H)
CONSOLE MAST
ARC WASHERS (G)
CONSOLE WIRES
MAIN FRAME
WASHERS (C)
SPRING WASHERS (I)
ASSEMBLY STEP : ASSEMBLY STEP :
B701_Rev.1.4.indd 10-11 7/29/08 9:21:31 AM