HONDA AUTOMATIC DAY/NIGHT MIRROR (ATTACHMENT KIT) - Manual (Page 6)

6 of 10
AII 30556 (0509) © 2005 American Honda Motor Co., Inc. - All Rights Reserved.
24. Plug the mirror harness 7-pin connector into the
rear of the mirror, then route the 4-pin connector
up and out through the console opening in the
roof lining as shown.
21. On M/T vehicles only, remove the two side covers
(four tabs) from the center console.
22. On M/T vehicles only, remove the two clips and
seven self-tapping screws, and pull the front
console out toward you to release four clips.
Unplug the vehicle 2-pin connector from the
accessory socket, then remove the front console.
4130150H
CONSOLE OPENING
IN ROOF LINING
ROOF LINING
MIRROR
HARNESS
MIRROR HARNESS
7-PIN CONNECTOR
DAY/NIGHT
MIRROR
MIRROR
HARNESS
4-PIN
CONNECTOR
23. Slide the day/night mirror stay onto the mirror
holder, then tighten the T20 Torx screw installed on
the day/night mirror.
4130140H
MIRROR
HOLDER
MIRROR
STAY
DAY/NIGHT
MIRROR
TORX
SCREW
4404311T
Pull
VEHICLE 2-PIN
CONNECTOR
CLIPS (2)
SELF-TAPPING
SCREWS (7)
CLIPS (2)
TABS (4)
SIDE
COVER
SIDE COVER
TABS (4)
CLIP
FRONT
CONSOLE
ILLUMINATION
BULB