HONDA AUTOMATIC DAY/NIGHT MIRROR (ATTACHMENT KIT) User Manual
Page 9
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
AII 30556 (0509)
9 of 10
4202010H
DAY/NIGHT MIRROR HARNESS
4-PIN CONNECTOR
INSTRUMENT
PANEL
DAY/NIGHT
MIRROR
HARNESS
4-PIN
CONNECTOR
ELECTRICAL
TAPE
PIECE OF
STEEL
WIRE
RIGHT FRONT
PILLAR
35. Tape a piece of steel wire to the 4-pin connector
end of the day/night mirror harness. Route the
harness end up along the instrument panel side
bracket, and out through the clearance between
the right front pillar and the instrument panel as
shown.
36. Remove the electrical tape and the steel wire
from the day/night mirror harness.
38. Connect the day/night mirror harness 4-pin
connector to the mirror harness 4-pin connector.
39. Secure the three clips from the day/night mirror
harness into the holes in the right front pillar.
40. Using isopropyl alcohol, clean the areas where
the cushion tapes will attach. Using scissors, cut
two EPT sealers in half. Secure the day/night
mirror harness to the roof panel with three EPT
sealers.
41. Using the remaining half of EPT sealer, secure
day/night mirror harness 4-pin connector to the
roof panel.
4202020H
4-PIN
CONNECTOR
MIRROR
HARNESS
DAY/NIGHT
MIRROR
HARNESS
ROOF CONSOLE
OPENING
HEAD
LINER
RIGHT
FRONT
PILLAR
37. Continue routing the day/night mirror harness 4-pin
connector up along the right front pillar, and out
through the roof console opening behind the head
liner.
4130040H
DAY/NIGHT
MIRROR
HARNESS
CLIP
RIGHT FRONT
PILLAR
DAY/NIGHT
MIRROR
HARNESS
4130052H
4-PIN
CONNECTOR
EPT SEALER (Half)
remaining from step 40
DAY/NIGHT
MIRROR
HARNESS
EPT SEALER
(Half: 3)
EPT SEALER